|
View unanswered posts | View active topics
It is currently Thu Sep 09, 2010 6:25 pm
  |
Page 1 of 1
|
[ 3 posts ] |
|
| Author |
Message |
|
littlefraggle
Engineer
Joined: Wed Aug 26, 2009 1:27 pm
Posts: 1
|
 Help in London UK Hello, newbie here. I need a lot of help. I want to buy a lathe and very quickly learn a skill for a very specific job which is putting very precise threads and screwcuts on stainless as well as some basic milling. What I really need is a tutor who I'd pay to come and teach me what I need to do. Not sure if it's even possible but I'm in South London and would even be happy to pay someone piecemeal for work on condition they teach me as we're going!
Any ideas very gratefully received.
Cheers
|
| Wed Aug 26, 2009 1:32 pm |
 |
|
|
Dom
Engineer
Joined: Fri Jun 16, 2006 6:15 pm
Posts: 168
|
Re: Help in London UK I would offer to help but I know nothing about turning so I'll have to pass. Have you tried asking on CNCzone.com as well?
_________________
We're big boys, We build big toys, We're handy with a spanner; If it don't work, We go beserk and hit it with an 'ammer
|
| Wed Aug 26, 2009 4:51 pm |
 |
|
|
graffian
Engineer
Joined: Tue Apr 22, 2008 11:45 pm
Posts: 50
Location: reigate
|
Re: Help in London UK Is this manual machine or CNC?
I can help if it's a manual machine.
|
| Wed Sep 02, 2009 2:30 am |
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
